Page Comparison

Configuration

To configure an AWS Lambda Function task:

1. Navigate to the Tasks configuration tab for the job (this will be the default job if creating a new plan).
2. Click the name of an existing AWS Lambda Function task, or click Add Task and then AWS Lambda Function to create a new task.

3. Complete the following settings:

   1. Common to all tasks
      

      Include Page
      _CommonTaskParametersTable _CommonTaskParametersTable

   • Actions supported by this task:

     Create Function

      

     Publish version	Check to publish a new function version as an atomic operation. Clear to override the $LATEST version.
     Function Name	Specify the function name.
     Description	(Optional) Specify a function description.
     Runtime	Select the runtime environment for the function.
     S3 Bucket	Specify the name of the S3 bucket where the deployment package is stored.
     S3 Key	Specify the deployment package's S3 object key. Maximum compressed size allowed is 50 MB. Maximum uncompressed size allowed is 250 MB.
     S3 Object Version	(Optional) Specify the deployment package's S3 object version.
     Handler	Specify the function within the code that Lambda calls to begin execution.
     Role ARN	Specify the Amazon Resource Name (ARN) of the IAM role that Lambda assumes when it executes the function to access any other Amazon Web Services (AWS) resources.
     Memory Size (MB)	Select the amount of memory, in MB, that Lambda allocates to the function. Info title Correlation between memory allocation and amount of CPU Lambda uses this memory size to infer the amount of CPU and memory allocated to the function. Your use-case determines your CPU and memory requirements. For example, a database operation might need less memory compared to an image processing function.
     Timeout (s)	Select the execution time, in seconds, at which Lambda should terminate the function.

     Update Function Code

     Advanced Options
     Environment

     Publish versionsee Create Function above

     Specify an environment configuration in JSON format. Refer to Environment Variables for details.
     KMS Key ARN	Specify the KMS Key ARN used to encrypt your function's environment variables. If not provided, AWS Lambda will use a default service key. Refer to Environment Variable Encryption for details. Note title Custom Encryption for Storing Sensitive Information As per sub section Storing Sensitive Information, this default encryption is not necessarily sufficient for all use cases, so if you need to store sensitive information in an environment variable, we strongly suggest you encrypt that information before deploying your Lambda function.
     VPC Configuration	Specify the VPC configuration in JSON format. Refer to Configuring a Lambda Function to Access Resources in an Amazon VPC for details.
     Dead Letter Configuration	Specify a dead letter configuration in JSON format. Refer to Dead Letter Queues for details.
     Update Function Code
     Publish version	see Create Function above
     Function Name	see Create Function above
     S3 Bucket	see Create Function above
     S3 Key	see Create Function above
     S3 Object Version	see Create Function above
     Update Function Configuration
     Function Name	see Create Function above
     Description	see Create Function above
     Handler

     Function Name

     see Create Function above
     Role	see Create Function above
     Memory (MB)	see Create Function above

     Description

     Timeout (s)	see Create Function above
     Advanced Options

     Handler 

     Environment	see Create Function above

     Role

     KMS Key ARN

     see Create Function above

     Memory (MB)

     VPC Configuration

     see Create Function above

     Timeout (s)

     Dead Letter Configuration	see Create Function above
     Delete Function

      

     Don't fail for non existing function	Check to not fail the build, if the function does not exist (anymore). Clear to trigger a build failure otherwise.
     Function Name	see Create Function above
     Publish Version	Tip You can also publish a version directly with the create/update function actions.
     Function Name	see Create Function above
     Description	see Create Function above
     Code SHA256	(Optional) Specify the SHA256 hash of the deployment package to publish.
     Create Alias

      

     Function Name	see Create Function above
     Function Version	Specify the function version to create/update the alias for.
     Alias Name	Specify the alias name.
     Description	see Create Function above
     Update Alias

      

     Function Name	see Create Function above
     Function Version	see Update Function Alias above
     Alias Name	see Update Function Alias above
     Description	see Create Function above
     Delete Alias

      

     Function Name	see Create Function above
     Alias Name	see Update Function Alias above
     Add Permission

      

     Function Name	see Create Function above
     Statement ID	Specify a unique statement identifier.
     Lambda Action	Specify the Lambda action to allow in this statement.
     Principal	Specify the principal who is granted this permission.
     Source Account	(Optional) Specify the AWS account ID (without a hyphen) of the source owner.
     Source ARN	(Optional) Specify the S3 bucket's Amazon Resource Name (ARN) to ensure that only events generated from the specified bucket can invoke the function. Note title Important If you add a permission for the Amazon S3 principal without providing the source ARN, any AWS account that creates a mapping to your function ARN can send events to invoke your Lambda function from Amazon S3.
     Remove Permission

      

     Function Name	see Create Function above
     Statement ID	see Add Permission above
     Invoke Function

      

     Function Name	see Create Function above
     Payload	(Optional) Specify a JSON payload to provide to the Lambda function as input.
     Client Context	(Optional) Specify client-specific JSON information to pass to the Lambda function in the context variable.
     Invocation Type	Select the function invocation type. Info By default, the Invoke API assumes "RequestResponse" invocation type. You can optionally request asynchronous execution by specifying "Event" as the InvocationType. You can also use this parameter to request AWS Lambda to not execute the function but do some verification, such as if the caller is authorized to invoke the function and if the inputs are valid
     Log Type	(Optional) Select "Tail" to return the last 4 KB of log data produced by your Lambda function.
     Don't fail on handled function errors	Check to not fail the build, if an error has been handled by the function. Clear to trigger a build failure otherwise.

Variables

Create Function

Creating common variables for 1 resources affected by task:
... bamboo.custom.aws.lambda.function.resources: arn:aws:lambda:eu-west-1:288727192237:function:TAWS-IT280-LF1-21-ubot
Creating resource variables for function 'arn:aws:lambda:eu-west-1:288727192237:function:TAWS-IT280-LF1-21-ubot':
... bamboo.custom.aws.lambda.function.resources.arn:aws:lambda:eu-west-1:288727192237:function:TAWS-IT280-LF1-21-ubot.FunctionArn: arn:aws:lambda:eu-west-1:288727192237:function:TAWS-IT280-LF1-21-ubot
... bamboo.custom.aws.lambda.function.resources.arn:aws:lambda:eu-west-1:288727192237:function:TAWS-IT280-LF1-21-ubot.FunctionName: TAWS-IT280-LF1-21-ubot
... bamboo.custom.aws.lambda.function.resources.arn:aws:lambda:eu-west-1:288727192237:function:TAWS-IT280-LF1-21-ubot.Description:
... bamboo.custom.aws.lambda.function.resources.arn:aws:lambda:eu-west-1:288727192237:function:TAWS-IT280-LF1-21-ubot.Runtime: nodejs
... bamboo.custom.aws.lambda.function.resources.arn:aws:lambda:eu-west-1:288727192237:function:TAWS-IT280-LF1-21-ubot.Handler: index.handler
... bamboo.custom.aws.lambda.function.resources.arn:aws:lambda:eu-west-1:288727192237:function:TAWS-IT280-LF1-21-ubot.Role: arn:aws:iam::288727192237:role/aws-lambda-basic-execution
... bamboo.custom.aws.lambda.function.resources.arn:aws:lambda:eu-west-1:288727192237:function:TAWS-IT280-LF1-21-ubot.MemorySize: 128
... bamboo.custom.aws.lambda.function.resources.arn:aws:lambda:eu-west-1:288727192237:function:TAWS-IT280-LF1-21-ubot.Timeout: 2
... bamboo.custom.aws.lambda.function.resources.arn:aws:lambda:eu-west-1:288727192237:function:TAWS-IT280-LF1-21-ubot.CodeSize: 499
... bamboo.custom.aws.lambda.function.resources.arn:aws:lambda:eu-west-1:288727192237:function:TAWS-IT280-LF1-21-ubot.LastModified: 2015-08-25T17:07:47.960+0000
... bamboo.custom.aws.lambda.function.resources.arn:aws:lambda:us-east-1:288727192237:function:TAWS-IT280-LF2-21-ubot.CodeSha256: uZHeTlbOPWHDSnEpKqfPlMvJJL8LLBchpZOFaAohZhg=
... bamboo.custom.aws.lambda.function.resources.arn:aws:lambda:us-east-1:288727192237:function:TAWS-IT280-LF2-21-ubot.Version: 1
Creating common variables for first resource affected by task:
Creating resource variables for function 'arn:aws:lambda:eu-west-1:288727192237:function:TAWS-IT280-LF1-21-ubot':
... bamboo.custom.aws.lambda.function.first.FunctionArn: arn:aws:lambda:eu-west-1:288727192237:function:TAWS-IT280-LF1-21-ubot
... bamboo.custom.aws.lambda.function.first.FunctionName: TAWS-IT280-LF1-21-ubot
... bamboo.custom.aws.lambda.function.first.Description:
... bamboo.custom.aws.lambda.function.first.Runtime: nodejs
... bamboo.custom.aws.lambda.function.first.Handler: index.handler
... bamboo.custom.aws.lambda.function.first.Role: arn:aws:iam::288727192237:role/aws-lambda-basic-execution
... bamboo.custom.aws.lambda.function.first.MemorySize: 128
... bamboo.custom.aws.lambda.function.first.Timeout: 2
... bamboo.custom.aws.lambda.function.first.CodeSize: 499
... bamboo.custom.aws.lambda.function.first.LastModified: 2015-08-25T17:07:47.960+0000
... bamboo.custom.aws.lambda.function.first.CodeSha256: uZHeTlbOPWHDSnEpKqfPlMvJJL8LLBchpZOFaAohZhg=
... bamboo.custom.aws.lambda.function.first.Version: 1

Update Function Code

See Create Function above.

Update Function Configuration

See Create Function above.

Delete Function

N/A

Publish Version

See Create Function above.

Create Alias

Creating common variables for 1 resources affected by task:
... bamboo.custom.aws.lambda.function.resources: arn:aws:lambda:us-east-1:288727192237:function:TAWS-IT280-LF2-21-ubot:alias-one
Creating resource variables for alias 'arn:aws:lambda:us-east-1:288727192237:function:TAWS-IT280-LF2-31-ubot:alias-one':
... bamboo.custom.aws.lambda.function.resources.arn:aws:lambda:us-east-1:288727192237:function:TAWS-IT280-LF2-21-ubot:alias-one.AliasArn: arn:aws:lambda:us-east-1:288727192237:function:TAWS-IT280-LF2-31-ubot:alias-one
... bamboo.custom.aws.lambda.function.resources.arn:aws:lambda:us-east-1:288727192237:function:TAWS-IT280-LF2-21-ubot:alias-one.Description: description one
... bamboo.custom.aws.lambda.function.resources.arn:aws:lambda:us-east-1:288727192237:function:TAWS-IT280-LF2-21-ubot:alias-one.FunctionVersion: 1
... bamboo.custom.aws.lambda.function.resources.arn:aws:lambda:us-east-1:288727192237:function:TAWS-IT280-LF2-21-ubot:alias-one.Name: alias-one
Creating common variables for first resource affected by task:
Creating resource variables for alias 'arn:aws:lambda:us-east-1:288727192237:function:TAWS-IT280-LF2-31-ubot:alias-one':
... bamboo.custom.aws.lambda.function.first.AliasArn: arn:aws:lambda:us-east-1:288727192237:function:TAWS-IT280-LF2-21-ubot:alias-one
... bamboo.custom.aws.lambda.function.first.Description: description one
... bamboo.custom.aws.lambda.function.first.FunctionVersion: 1
... bamboo.custom.aws.lambda.function.first.Name: alias-one

Update Alias

See Create Alias above.

Delete Alias

N/A

Add Permission

Creating add permission result variables for function 'TAWS-IT280-LF1-21-ubot':
... bamboo.custom.aws.lambda.function.policy.Statement: {"Condition":{"ArnLike":{"AWS:SourceArn":"arn:aws:s3:::taws-it280-21-ubot"}},"Action":["lambda:InvokeFunction"],"Resource":"arn:aws:lambda:eu-west-1:288727192237:function:TAWS-IT280-LF1-21-ubot","Effect":"Allow","Principal":{"Service":"s3.amazonaws.com"},"Sid":"TAWS-IT280-LF1-21"}

Remove Permission

N/A

Invoke Function

Creating invocation result variables for function 'TAWS-IT280-LF1-21-ubot':
... bamboo.custom.aws.lambda.function.result.FunctionError: null
... bamboo.custom.aws.lambda.function.result.LogResult: null
... bamboo.custom.aws.lambda.function.result.Payload:
... bamboo.	custom.aws.lambda.function.result.StatusCode: 200

How-to Articles

Frequently Asked Questions (FAQ)